 | |
 | | AS-1021M-UR+V | - A+ Server 1021M-UR+V (Silver)
| | AS-1021M-UR+B | - A+ Server 1021M-UR+B (Black)
| | | | | CPU | - Dual 1207-pin Socket F
- Supports up to two Quad-Core / Dual-Core AMD Opteron™ 2000 Series (Socket F) processor(s)
- Dual-core Support
- 1 MB Cache
| | System Bus | | | Chipset | | | | |
| | Memory Capacity | - Sixteen 240-pin DIMM sockets
- Supports up to 64 GB DDR2 667/533/400 MHz memory
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
- Dual channel memory bus
| | Memory Type | - DDR2 667/533/400 MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 256 MB, 512 MB, 1GB, 2GB, 4GB
| | Memory Voltage | | | | |
| | SATA | - nVidia MCP55 Pro SATA2 3.0Gbps Controller
- 6 SATA Ports
- nVidia Host RAID 2.0
- SATA RAID 0, 1, 0+1, 5, JBOD Support
| | IPMI | - Intelligent Platform Management Interface v.2.0 ( Optional: AOC-SIMSO(+) R 3.00 )
- RMM (Remote Management Module)
- (Card not included)
- For dedicated LAN, CBL-0177L must be used on left full-size slot. (Cable not included)
| | Network Controllers | - nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | VGA | - ATI ES1000 Graphics Controller
| | Super I/O | | | | |
| | SATA | | | IDE | - Single EIDE channel support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
| | Floppy | - 1 Floppy port; 1.44 MB support
| | LAN | | | USB | - FUCI
- Up to 6 USB Ports 2.0 Compliant
- 2 Rear Ports
- 4 Internal Headers
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 1 Fast UART 16550 serial port
- 1 serial port header
| | Others | | | | |
| | BIOS Type | - 8Mb Flash EEPROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- BIOS Rescue Hot Keys
- USB Keyboard Support
- Hardware BIOS Virus Protection
- SMBIOS 2.3
| | | | |
| | Form Factor | | | Model | | | | |
| | Height | | | Width | | | Depth | | | Gross Weight | | | Available Colors | | | | |
| | Buttons | - Power On/Off button
- System Reset button
- UID button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- Universal Information (UID) LED
| | Ports | - 2x USB & DB9 COM port tray
- (Optional - in place of floppy drive)
| | | |
| | Left Slots | - 1 Universal I/O (UIO) Slot
(Full-height / Full-length) - 1 PCI-express x8 Slot
(Full-height / Full-length)
| | | |
| | Hot-swap | - 4 x 3.5" Hot-swap SAS / SATA drive bays
| | | |
| | 1U SAS / SATA Backplane w/ AMI 9071 chip | | | |
| | DVD-ROM | - Slim 8x DVD, 24x CD, DVD-ROM drive
| | | |
| | Fans | - 4x 4cm counter-rotating fans
| | | |
| | 650W AC power supply w/ PFC | | AC Voltage | - 100 - 240V, 60-50Hz, 8-4 Amp
| | +5V | | | +5V standby | | | +12V | | | -12V | | | +3.3V | | | | |
| | CPU | - Monitors CPU Core Voltages, +3.3V, +5V, ±12V, +5V Standby, HyperTransport Link voltage, memory voltage, VBAT, Chipset voltage
- CPU 4-Phase-switching voltage reulator
| | FAN | - Total up to 8-fan status tachometer monitoring
- Up to two 4-pin and six 3-pin fan headers
- Status monitor for speed control
- Stauts monitor for on/off control
- Low noise fan speed control
| | Temperature | - Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal Control for 8x Fan Connectors
- I2C Temperature Sensing Logic
| | LED | - CPU / System Overheat LED
- Suspend-State Indicator LED
- +5V Standby Alert LED
- UID/Remote LED
| | Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
| | | |
| Environmental Specifications | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
| |
A+ Server 1021M-UR+B