| | Adapter Architecture |
| | 
| Intel IOP331 |
| | | PCI-X 64bit/133MHz |
| | | 256MB on-board DDR333 SDRAM with ECC protection (4/8-port) |
| | | One SODIMM socket with default 256MB of DDR333 SDRAM with ECC protection, Upgrade to 1GB. An ECC or non-ECC SDRAM module using X8 or X16 chip organizatoin (12/16/24-port) |
| | | Write-through or write-back cache support |
| | | Support up to 4/8/12/16/24 SATA II drives |
| | | Multi-adapter support for large storage requirements |
| | | BIOS boot support for greater fault tolerance |
| | | Battery Backup Module (BBM) ready
ARC-6120BA-T1xx, xx means version no.
|
| | | RoHS Compliant |
| | |
| | RAID Features |
| | | RAID level 0, 1, 1E, 3, 5, 6 and JBOD |
| | | Multiple RAID selection |
| | | Array roaming |
| | | Online RAID level/stripe size migration |
| | | Online RAID capacity expansion and RAID level migration simultaneously |
| | | Instant availability and background initialization |
| | | Automatic drive insertion/removal detection and rebuild |
| | | Greater than 2TB per volume set |
| | | Support S.M.A.R.T, NCQ and OOB Staggered Spin-up capable drives |
| | | Support spin down drivers when not in use to extend service life (MAID) |
| | |
| | Monitors/Indicators |
| | | System status indication through HDD activity/fault connector, LCD Connector and alarm buzzer |
| | | SMTP support email notification |
| | | SNMP support for remote notification |
| | | I2C Enclosure management ready |
| | |
| | RAID Management |
| | | Field-upgradeable firmware in flash ROM |
| | | In-Band Manager |
| | | Hot key boot-up McBIOS RAID manager via BIOS |
| | | Support controller's API library for customer to write its own AP |
| | | Support Command Line Interface (CLI) |
| | | Browser-based management utility via ArcHttp Proxy Server |
| | | Single Admin Portal (SAP) monitor utility |
| | | Disk Stress Test (DST) utility for production in Windows |
| | | Out-of-Band Manager |
| | | Firmware-embedded Browser-based RAID manager, SMTP manager, SNMP agent, and Telnet function via Ethernet port (for 12/16/24 port Adapter) |
| | | Support controller's API library for customer to write its own AP (for 12/16/24 port Adapter) |
| | | Push Button and LCD display panel |
| | | |
| | Software Drivers |
| | | Windows 2000/XP (Scsiport Driver) |
| | | Windows Server 2003 (Scsiport Driver and Storport Driver) |
| | | Redhat Linux and SuSE Linux |
| | | FreeBSD |
| | | Solaris 10x86 |
| | | UnixWare 7.1.x |
| | | Netware 6.5 |
| | | |
| | Environmental/Physical |
| | Mechanical |
| | | Dimension: | ARC-1110/1120: 64(H) x 168(L) mm | | | ARC-1130 /1160: 98.4(H) x 214(L) mm | | | ARC-1170: 98.4(H) x 217(L) mm | | | | SATA Interface: | ARC-1110/1120/1130/1160/1170 (Multi-layer SATA connector) | | | ARC-1130ML/1160ML (3/4 Internal multi-lane connector) |
|
| | | |
| | Environmental Specifications |
| | | Operating: | Temperature:+5°c to +50°c | | | Humidity: 15-80% | | | non-condensing | | | | Storage Temperature: | Temperature:-40°c to 70°c | | | Humidity: 5-90% | | | non-condensing |
|
| | |
| | Electrical |
| | | Power Requirements: | 5.5W max. On +5V | | | 4.75W max. On 3.3 V | | | 0.72W max. On+12V |
|
| | |
| | | Note: | The stick (part number: xx-/1130D1/1160D1/1170D1-xxxx) on the card, means 256MB ECC memory is included (ready to boot), if shows xx-/1130/1160/1170-xxxx, that means memory not included. You must make a separate purchase of memory and insert into adapter, before operating adapter) |
|
Areca ARC-1110